How To Convert Coax Cable to HDMI

If you are considering getting a new TV, you should keep in mind it is possible that your new TV won’t come with a coax port. It may come with many connectors and component ports but no coax. If you have an older satellite or cable box that only outputs coaxial, you could have difficulty connecting the two.

A Coax connection is normally utilized to receive the cable and satellite network in our residences. The majority of the analog, secure and moderately economical transmission is being carried out by this connector. 

Since the coaxial cable transmits both video and audio signals from a television programming source to a TV, it is largely used in the industry, but as the technology changes, most of the newest TV devices come with HDMI connectors instead of coaxial cable. Modern television sets, and particularly high-definition TVs, are equipped with different ports for connecting to a source. The most popular digital connection is a High Definition Media Interface (also known as HDMI) cable that uses a six-sided connector. To meet with this coax connection, a powered HDMI adopter similar to an old RF modulator needs to be employed to switch coaxial cable connection to HDMI. It is available at electronics stores, this adapter attaches to both cables in just minutes.

Before explaining the process of converting coaxial signals to HDMI, let’s first see the differences between coaxial and HDMI cable connectors.

  • Coaxial cables are habitually created to transmit analog signals in the audio and video form from a place to another, just like cable connections for our residence and office television sets. The purpose to employ this kind of coaxial connection is to transmit radio signals with minimal interference possible.
  • High Definition Multimedia Interface or HDMI cables are designed to transmit digital data with high-quality video and audio to our television sets in a short distance typically within a room.

HDMI is completely digital so it is consequently protected against loss and does not require frequent repeating over distance. It can transmit a lot more data added for the same size at significantly higher speeds. Digital transmissions are immune to disturbance when the proper configuration is employed so it is very beneficial within busy houses with a lot of WiFi networks and gadgets.

The process to convert Coaxial Cable to HDMI:

There are lots of methods to transform coax to HDMI through some safe and cheap HDMI Converter.

To convert the coaxial cable to HDMI, we just need a reliable HDMI adopter that will receive the analog signal from the coax cable and transforms them into digital signals.

  1. Connect the end of a coax cable to the signal adopter box and twist it clockwise to attach it with the device.
  2. Connect the other end of the cable to the back of your TV set or a signal source.
  3. Connect the HDMI cable into the adapter box.
  4. Connect the remaining end of the HDMI cable to a connector on the back of your TV.

If you would like to receive a quote for any of Network Custom Cables, Audio or Video Vustom Assemblies, please do not hesitate to contact us by sending an email to [email protected] or calling in the USA this phone number (682-325-1944)

Jessica Cardona
www.readytogocables.com