Whether your coaxial cables are new or used, it is necessary to periodically test a coax cable for the existence of a signal. For this purpose, many people utilize Digital Receivers (DR) or Covert Digital Receivers (CDJs).
There are many different types of these cable testers available on the market today from which to choose. Most of these are inexpensive, easy to operate, and can be used to test various types of coax cables. Some of these tools are available as kits that come with everything necessary to test a coax cable. Others are sold separately and may only need the appropriate wires to conduct the test.
Coaxial cable testing methods
A Coaxial cable signal test can provide information on the quality of the digital or analog signals transmitted through a Coaxial cable. When used in combination with the right equipment and proper installations, a Coaxial Cable Signal Test (also known as an Anti-Vibration Test) can guarantee the proper functioning of your cable. This testing is executed in audio frequencies below the human audible frequency range but above the FCC limits for ‘commercial use’ frequencies. That is to protect the interest of everyone using the bandwidth by making sure they are receiving and using the best signal quality. The numerous advantages of undertaking a Coaxial Cable Signal Test include protection against interference and static, anti-jamming, protection from harmful electromagnetic radiation, and checking for unwanted noise.
It is advised that an expert carries out this type of test. The technicians who conduct it should use a testing plot, which monitors and plots the signal’s power, time, frequency, and different parameters, including QoS, compression, and relaxation levels. This information can be beneficial in identifying if the signals transmitted by the Coaxial Cable are being received at their optimum level. Additionally, it shows if any interference has been introduced into the signal.
It is easy to detect if a Coaxial Cable is suffering from a signal integrity problem – if signals are getting lost during transmission, or if the power signal fluctuates at odd times, this could indicate a severe problem. Similarly, if you hear buzzing or whining noises from the Coaxial cable when the signal comes into contact with it, in that case, there is a strong possibility that the Coaxial cable is suffering from interference.
Apart from performing the above-mentioned different tests, there is another excellent way to check for the presence of a weak signal in a coaxial cable. People can do this by getting rid of the unnecessary insulation around the connectors. It is recommended that the best coaxial cable runs along with the least insulated layer. This is because any layer other than the insulation gets affected by external interference and noise, reducing the signal’s performance. In addition to that, if the coaxial cable insulation is damaged somehow, then you can quickly notice it by observing that the signals are distorted.
If your coaxial cable fails a signal integrity test, then you must repair or replace the Coaxial cable immediately.
If you would like to receive a quote for any of custom cables or connectors, please do not hesitate to contact us by sending an email to [email protected] or calling in the USA this phone number (682-325-1944).