Which connectors are used with fiber optic cabling?

Years ago, fiber optic connectors presented a severe concern for network installers, mainly because they were difficult to use. But nowadays, manufacturers are producing connectors that are more user-friendly and that are made conform to determined industry standards. Thanks to these changes, more and more companies are turning to fiber optic systems to build their business networks.

Information Technology specialists who work in the industry of cables must have a complete understanding of fiber cable connectors. Like any craft, data center and IT professionals should have a solid foundation of fundamental knowledge since they are crucial in this industry.

Fiber Optic Cable Connectors

Fiber-optic Cable Connectors are components installed on Fiber wire ends to give cable attachment to a transmitter, receiver, or another cable. For information to be transmitted effectively, the fiber cores need to be correctly adjusted. They usually are devices that can be connected and disconnected frequently.

Which connectors are used with fiber optic cabling?

Functions of Fiber Optic Connectors

The fiber optic connectors have numerous functions. It lines up the fiber with emitters in transmitters, adjacent fibers in splices, and photo-detectors in receivers. With the creation of multiple connector styles, each one has its own positive aspects, drawbacks, and features. All fiber optic connectors have four fundamental components, which are the ferrule, connector body, cable, and coupling device.

Types of Connectors

There are numerous kinds of Fiber Optic Cable connectors:

Polish and Epoxy Connectors

Polish and Epoxy type connectors were initially used for termination. These are still under a very high rate of massive installation. These connectors provide an extensive range of choices that include SMA, D4, MT-RJ, SC, ST, LC, FC, and MU. Some of their benefits are present in the list below:

  • Sturdiness – skill to bear higher levels of external and mechanical pressure
  • Cable size – they can be used with cables of different diameters, from big to small
  • Multiple Connectors – Can handle single and multiple cables (up to 24) in a single connector

Polish and No-Epoxy or Pre-Loaded Epoxy Connectors

The principal benefit of these connectors is that they are really easy to install. This means that lower skill levels are needed to handle them. These connectors can have further categorization as follows:

  • Connectors with preloaded Epoxy
  • Connectors that do not have Epoxy
  • The fiber has stabilization by an inner crimp mechanism, and these connectors are available in SC, ST, and FC types.

No Polish and No-Epoxy

Simple design and low cost are the distinctions of these connectors. The effect of training and installation is an increased cost reduction. Furthermore, this also allows for fast restorations. They are available in SC, ST, LC, FC, and MT-RJ connector forms.

Various connectors, both standard, and proprietary are still utilized in the field of telecommunication equipment, data lines, television, cable, and other industrial areas. The connectors described in this article are the ones that are under extensive use in the past.

Some of the most popular connector types are:

  1. Bionic Connector
  2. Standard Connector (SC)
  3. Ferrule Core Connector (FC)
  4. ST Connector (ST)
  5. SMA Connector
  6. Lucent Connector (LC)

If you would like to receive a quote for any of custom cables or connectors, please do not hesitate to contact us by sending an email to [email protected] or calling in the USA this phone number (682-325-1944)

Jessica Cardona
www.readytogocables.com